CARVER MXR-900 Receiver

( Brand: Carver ), ( Model: MXR-900 ), ( Part Type: Receiver ), ( Country/region Of Manufacture: Japan )

Review CARVER Vintage The Receiver 900

The MXR-900 Carver Receiver 900 is an exquisite piece of audio technology designed for discerning audiophiles. This high-end receiver boasts a powerful 900 watts of total system power, delivering crisp, immersive sound that will transport you into your favorite music, movies, or games.

The MXR-900 Carver Receiver 900 features a sleek, modern design that will complement any home entertainment system. Its brushed aluminum front panel and black finish exude a sense of sophistication and elegance. The receiver's large, easy-to-read display shows all the essential information at a glance, including input selection, volume level, and song information (if connected to a compatible source).

The MXR-900 Carver Receiver 900 is equipped with a wide range of connectivity options, including six analog RCA inputs, two optical digital inputs, and one coaxial digital input. It also features Bluetooth connectivity, allowing you to stream music wirelessly from your smartphone or tablet. Additionally, the receiver has a phono input for connecting a turntable, and a USB input for playing music from a storage device.

The MXR-900 Carver Receiver 900 offers multiple listening modes to suit your preferences, including direct, stereo, and bi-amp. It also features a built-in subwoofer output, allowing you to add extra bass to your system. The receiver's audio adjustments include bass, treble, balance, and loudness controls, as well as a phase switch to optimize the sound for your specific speaker setup.

The MXR-900 Carver Receiver 900 is designed to be easy to use, with intuitive controls and clear instructions. The receiver's remote control allows you to adjust the volume, change inputs, and access additional features from the comfort of your seat. The receiver also features an auto-standby mode, which turns off the receiver after a period of inactivity to save power.

In conclusion, the MXR-900 Carver Receiver 900 is a top-of-the-line audio receiver that delivers exceptional sound quality, versatile connectivity options, and easy-to-use features. Its modern design, powerful sound, and wide range of features make it an excellent choice for any home entertainment system.

1. High-quality sound: The MXR-900 is known for its excellent sound quality, with features like a 300-watt per channel output, a high-fidelity phono preamp, and a digital audio input for connecting digital sources.

2. Durable construction: The receiver is built with high-quality components and a heavy-duty chassis, ensuring it will last a long time.

3. Versatile connectivity: The MXR-900 has a wide range of connectivity options, including analog and digital inputs, as well as Bluetooth and USB connections.

4. Easy to use: The receiver has a user-friendly interface with clear display and easy-to-use controls.

1. Price: The MXR-900 is a high-end receiver, and its price may be prohibitive for some buyers.

2. Limited features: Compared to some other receivers in its price range, the MXR-900 may not have as many advanced features, such as Wi-Fi connectivity or multi-room audio.

3. Size: The receiver is quite large, which may make it difficult to fit in smaller spaces.

The MXR-900 Carver Receiver is a high-quality, durable, and versatile option for anyone looking for a top-of-the-line receiver. Its excellent sound quality and wide range of connectivity options make it a great choice for home theater or music enthusiasts. However, its high price and size may be a drawback for some buyers. If you are willing to invest in a high-end receiver and have the space for it, the MXR-900 is a great option.

If you are looking for a high-end receiver with excellent sound quality and a wide range of connectivity options, the MXR-900 Carver Receiver is a great choice. However, if you are looking for a more budget-friendly option or want more advanced features, you may want to consider other options. In any case, make sure to do your research and compare different receivers to find the one that best fits your needs and budget.

Details:

Also has pre-out main-in jacks to facilitate using a sound processor or an equalizer, as well separate amplifier. Message me with any questions, I normally answer same day.

1 total harmonic distortion. Chassis was cleaned as well.

These were full featured units with 2 tape inputs and dubbing between them. I have re-capped the power amplifier board and also changed out large filter capacitors. Idle current was reset to factory service manual specifications. The steel cabinet was rusted and pitted, I sanded refinished it.

Vintage Carver the receiver 900 incorporating famous bob magnetic field power amplifier. This sounds excellent, with plenty of punch. Looks okay, I am not a painter, so check the photos and judge for yourself. Front panel nice shape, the only defect is Carver letters are partially rubbed off, and a couple of nicks along top edge.

All controls, switches were cleaned and re-lubed. Shipped with USPS parcel select ground. 90 real RMS watts per channel 8 ohms with no more than.

part #: mxr900 prices

• $12.95-$47.95

specifications partsvintageaudio:

• brand: Carver
• model: Mxr-900
• part type: Receiver
• country/region of manufacture: Japan

Offer partsvintageaudio:

• Started: February 8, 2019, 1:30 pm
• best offer: true
• bids: 0
• Sold: 0
• quantity: 1

Payments partsvintageaudio:

• PayPal

Shipping partsvintageaudio:

• cost: $0.0
• handling: 1 days
• type: Calculated

Returns partsvintageaudio:

• policy: no returns

Seller partsvintageaudio:

• city: Reading, Michigan
• # feedbacks 02-08-19: 1427
• rating 02-08-19: 100.0%
• zipcode: 49274

General partsvintageaudio:

• in stock: Yes
• Vintage Parts Accessories > Other Vintage A/V Parts Accs

Carver MXR-900 Is Similar To:

• Carver Vintage Rk-cd1 Rack Shelf (56.7% similar) This is a cool piece. New in the box. Perfect condition. This would make a great standalone shelf, or your Carver collection complete. Has front panel that frames the equipment or can be used just as a shelf without. Dimensions: 19 WIDE15 1/2 DEEP5 inches high in front. Vintage Carver rack shelf. I ...(September 10th, 2017)
• Ct-7 Vintage Carver Preamp Tuner (38.8% similar) Here is a Carver CT-7 preamps tuner with sonic hologram works perfectly near mint condition...(October 13th, 2018)
• Mxr-2000 Carver Receiver For Parts Or Fix Partly Working (48.4% similar) Carver 2000 receiver for parts or fix. I don't know what is wrong. The unit lights up partially relays kick in and amplifier section works. It is being sold for parts or fix and as seen in the pictures. The are a bunch of knobs missing as can be seen in pictures. The preamps and tuner do not work...(April 6th, 2018)
• Carver N43093-t-br2 Mxr-130 Rcvr Tone Defeat Mute Etc Button (29.5% similar) Carver MXR-130 tone defeat, mute, etc, button N43093-T-BR2, part #: N43093-T-BR2...(December 1st, 2023)
• Carver Pa-509 Mxr-130 Switches Mute Mono Am Filter And Tone Defeat (31.7% similar) Carver MXR-130 switches mute, mono, am filter, and tone defeat, PA-509, switch board part # good - removed from working unit, PA-509...(January 19th, 2024)
• Alps Spun191600 Push Button Switch 2pdt Latching Pioneer Carver Mxr 130 Lot Of 20 (20.5% similar) Push button switch. If switch is to be used in an assembly, remove blue collar. If used as a stand alone, leave blue collar on. Suitable for replacing any 2 pole switch except in interlocking assemblies...(January 13th, 2025)
• Carver Sda-350 Vintage Rack Handles For Cd Player (47.6% similar) Please review photos to also determine condition. Vintage Carver rack handles for SDA-350 CD player. Handles are in very good condition...(May 18th, 2025)
• Carver Tfm-6cb Vintage 1 3 8 Inch Audio Rack Handles With Chassis Mount For Amplifier (38.3% similar) Note: if you remove the chassis mounts, these handles will also fit Carver C-5 and CT-6. Vintage Carver 1/3 /8 audio rack handles w/ chassis mount for TFM-6CB amplifier. These are in good condition, minimal surface marks - please review photos to also determine condition...(May 19th, 2025)
• Carver A-390t Vintage Sd a-390t Rack Handles (48.1% similar) Vintage Carver SD/A-390T rack handles. In good condition, please also use photos to determine condition...(July 19th, 2025)